Filter indicator
A filter light may be a maintenance timer rather than a failed component. Clean or replace only the filters specified by the manufacturer.
MODEL-SPECIFIC ERROR-CODE GUIDANCE
Rangehood Error Codes and Fault Guide
Rangehood lights usually concern filter maintenance or controls, while poor extraction and noise can relate to filters, ducting, installation, the motor or fan. The model manual is the safest reference.
START WITH THE SYMPTOM
Common fault groups
These groups help describe the problem. They do not replace the manufacturer manual or appliance diagnosis.
Poor extraction
Check the selected speed and accessible filter condition. Duct restrictions and installation issues require appropriate inspection.
Noise and vibration
Loose filters, fan imbalance, duct vibration or motor wear can cause noise. Stop for scraping, smoke or a burning smell.
Lights and controls
Record which buttons, speeds and lamps are affected and whether the issue began after a power interruption.
BRAND EXAMPLES
Codes are not universal
Always verify the exact model. Similar-looking codes can have different meanings across brands and product generations.
BrandExamplesGuidance
SchweigenFilter and control indicators
Motor and controller arrangements vary; use the manual for the exact rangehood model.
SmegFilter timer and control symbols
Reset procedures differ between control panels and should be taken from the model manual.
BoschSaturation indicators
Identify the E-Nr before following a filter-indicator reset sequence.
Reviewed: September 2026. Manufacturer documentation can change; use the current manual for the appliance model.
Check this appliance in Miele Australia Customer Assistance ↗
SAFETY FIRST
When to stop using the appliance
Switch it off and isolate power or water only when safe to do so if there is smoke, sparking, a burning smell, an active leak, uncontrolled overheating, a cracked cooktop or repeated breaker trips. Do not remove panels, bypass locks or test live wiring.
View rangehood repair information →FREQUENTLY ASKED QUESTIONS
Rangehood code questions
What does my rangehood error code mean?
The meaning depends on the brand, exact model and sometimes the program stage. Record the complete code and model number, then compare it with the manufacturer manual before treating it as a diagnosis.
Can I reset the code by switching the appliance off?
A single power reset may clear a temporary message when the manufacturer manual recommends it, but repeated codes should not be continually reset. Stop using the appliance for leaks, smoke, sparks, burning smells, overheating or repeated electrical trips.
What information should I include in a repair request?
Include the brand, full model number, complete code or light pattern, when it appears, what the appliance was doing and any unusual sound, smell, leak or heat.
Does an error code confirm which part has failed?
No. A code identifies a condition detected by the appliance and several causes may be possible. Proper diagnosis is needed before parts are selected.
RELATED FAULT GUIDES
Explore another appliance
Move directly between appliance fault guides, or return to the full service and brand directories.
NEED MODEL-SPECIFIC HELP?