Drainage and spin
The machine may stop with water inside, fail to spin or display a drain-related message. A visibly kinked drain hose or accessible filter obstruction may be relevant, but the code is not a confirmed pump diagnosis.
MODEL-SPECIFIC ERROR-CODE GUIDANCE
Washing Machine Error Codes and Fault Guide
Washing machine codes commonly point to drainage, water supply, door-lock, load-balance, leak, motor or control conditions. The exact meaning depends on the brand and model.
START WITH THE SYMPTOM
Common fault groups
These groups help describe the problem. They do not replace the manufacturer manual or appliance diagnosis.
Water inlet
Filling may be slow or may not begin. Confirm only that the household tap is open and the visible inlet hose is not kinked; do not remove valves or internal panels.
Door and lock
The cycle may not start or the door may remain locked while water is present. Do not force the door or bypass the interlock.
Balance, foam and load
An uneven load or excess detergent can interrupt spinning. Follow the user manual for redistribution and detergent guidance.
BRAND EXAMPLES
Codes are not universal
Always verify the exact model. Similar-looking codes can have different meanings across brands and product generations.
BrandExamplesGuidance
BoschE16/F16, E17/F17, E18/F18, E23/F23
Documented families include door, water-supply, drainage and leak-related conditions on supported models. Check the E-Nr and manual.
Samsung4C/4E, 5C/5E, UE/Ub, LC/LE, dC/dE
Documented families can indicate filling, draining, load balance, leak detection or door conditions.
LGOE, IE, UE, dE, PE
Common families cover drainage, inlet, imbalance, door and water-level sensing; verify the Australian model manual.
MieleF20, F34/F35, F53, F56, F138, F210 and inlet/drain/Waterproof messages
Miele documents numerical faults and plain-language messages. Meanings and checks can differ by model, so record the exact display.
Reviewed: September 2026. Manufacturer documentation can change; use the current manual for the appliance model.
Check this appliance in Miele Australia Customer Assistance ↗
BRAND-SPECIFIC LISTS
Detailed error-code pages
These pages contain fuller, brand-specific lists and remain editable from the WordPress dashboard.
SAFETY FIRST
When to stop using the appliance
Switch it off and isolate power or water only when safe to do so if there is smoke, sparking, a burning smell, an active leak, uncontrolled overheating, a cracked cooktop or repeated breaker trips. Do not remove panels, bypass locks or test live wiring.
View washing machine repair information →FREQUENTLY ASKED QUESTIONS
Washing Machine code questions
What does my washing machine error code mean?
The meaning depends on the brand, exact model and sometimes the program stage. Record the complete code and model number, then compare it with the manufacturer manual before treating it as a diagnosis.
Can I reset the code by switching the appliance off?
A single power reset may clear a temporary message when the manufacturer manual recommends it, but repeated codes should not be continually reset. Stop using the appliance for leaks, smoke, sparks, burning smells, overheating or repeated electrical trips.
What information should I include in a repair request?
Include the brand, full model number, complete code or light pattern, when it appears, what the appliance was doing and any unusual sound, smell, leak or heat.
Does an error code confirm which part has failed?
No. A code identifies a condition detected by the appliance and several causes may be possible. Proper diagnosis is needed before parts are selected.
RELATED FAULT GUIDES
Explore another appliance
Move directly between appliance fault guides, or return to the full service and brand directories.
NEED MODEL-SPECIFIC HELP?