Miele washing machines use fault numbers and display messages to identify conditions detected by the appliance. The exact meaning and recommended action can vary by model and series, so record the full code and model number before arranging service.
Miele washing machine fault-code list
The current Miele Australia support library includes the following numbered faults:
- F1
- F2
- F3
- F4
- F10 — Water inlet fault. The machine has detected restricted or insufficient incoming water. Check that the tap is open and the visible inlet hose is not kinked.
- F11 — Drainage fault. Water has not drained as expected. A restricted hose, filter or pump path may be involved; retained water can be hot.
- F15
- F16
- F19
- F20 — Heating fault. The expected water temperature was not reached. This needs diagnosis rather than repeated resets.
- F29
- F34 — Door-lock fault. The door has not locked correctly. Do not force the door or bypass the lock.
- F35 — Door-release fault. The door could not be released normally. Allow the machine to stop fully and do not force it open.
- F37
- F39
- F41
- F43
- F44
- F45
- F47
- F49
- F50
- F51
- F53 — Motor-speed monitoring fault. The appliance has detected an abnormal drive or speed condition; professional diagnosis is recommended.
- F56 — Final spin below the expected speed. An unbalanced load or another drive-related condition may be involved. Record the load and programme used.
- F62
- F63
- F64
- F65
- F81
- F83
- F92
- F103
- F104
- F105
- F106
- F130
- F131
- F138 — Waterproof system activated. Water has been detected in the base tray, commonly because of an internal leak. Stop using the machine, close the water tap and arrange service.
- F139
- F140
- F199
- F210 — Check filter and nozzle. The machine has detected a condition requiring the model-specific filter and nozzle checks in the operating instructions.
- F211
- F212
- F213
- F214
- F220
- F242
- F252
- F373
Other common Miele washing machine messages
- Check inlet
- Drain indicator flashing
- Water inlet fault
- Water drainage fault
- Waterproof system activated
- Technical fault / Call Service
- Door locked
- Check detergent
- TwinDos maintenance or cartridge messages
What to do
- Record the complete message and model number.
- Switch the appliance off and consult the operating instructions.
- Do not repeatedly reset a code involving water leakage, overheating, electrical smell or a waterproof-system warning.
- Arrange diagnosis if the fault returns.
View our Miele washing machine repair information or book a repair.
Official reference: Miele Australia washing machine customer assistance.
Selected fault meanings and safe next steps
Checked against Miele Australia guidance on 13 September 2026. This is a selected explanation guide, not a service manual or a diagnosis of your appliance. The directory above does not mean every code applies to every model.
F10: water supply
Miele identifies a restricted inlet. Check that the water tap is open and look for a visible hose kink without moving or dismantling the machine. Filter or plumbing work should follow the exact model instructions.
Read Miele’s official guidance for this fault
F11: drainage
A restricted drain can involve the hose, filter or pump. Water may remain in the drum and can be hot. Switch off and let it cool; do not remove a filter completely while water is retained. Follow the linked controlled-draining instructions or request help.
Read Miele’s official guidance for this fault
F138: water in the base tray
The Waterproof system has detected water from an internal leak. Close the water supply and disconnect power only if safely accessible. Arrange service; repeated resets do not repair the leak. Never force the door or reach into a moving drum.
Read Miele’s official guidance for this fault
Questions before booking a repair
Does the code tell me which part to replace?
No. A fault display describes a detected condition. Record the complete code, model and symptoms before a technician diagnoses the cause. Do not buy a part based only on a code.
What if my code is not explained here?
Check the official Miele support directory linked above and the operating instructions for your exact model. Send us a photo of the display and the model details when requesting help.
When should I stop using the appliance?
Stop if there is leaking water, smoke, a burning smell, electrical tripping or uncontrolled heat. Do not remove panels or bypass safety devices. Isolate power only where safe to do so and arrange professional help.
What information helps with a repair enquiry?
Provide the model, full code, when it appears, whether it returns, and your suburb. Do not move a heavy or built-in appliance just to find its label.
Related Miele help
Request appliance repair help · Browse all appliance error codes